Print Back
Because it is lightweight and corrosion resistant, aluminum woven wire mesh is sometimes used in trellises or critter control applications.

The wire mesh specifications featured here are popularly requested items that many users prefer in various farm, garden and agricultural applications. Keep in mind the list of items here is not exhaustive.

Should you not see your required specification here, please contact us to discuss your requirement or continue to browse other specifications in the mesh by material section of the website. Darby also offers custom manufacturing.
Aluminum Wire Mesh for Farm, Garden, and Agricultural Use
Unit of Measure
Items 2 x 2 Inch (in) Opening Size to 2 x 2 Aluminum Woven Wire Mesh (2"AL.192IN-O)
1"AL.120IN
Aluminum Wire Mesh - 1 x 1 Mesh, 0.120" Diameter Wire
Aluminum Wire Mesh for Farm, Garden, and Agricultural Use
1AL.080IN
Aluminum Wire Mesh: Popular in Farm, Garden and Agricultural Use
2 x 2 Inch (in) Opening Size to 2 x 2 Aluminum Woven Wire Mesh (3/4"AL.105IN)
2AL.080IN
Aluminum Wire Mesh - 2 x 2 Mesh, 0.080" Diameter Wire
2 x 2 Inch (in) Opening Size to 2 x 2 Aluminum Woven Wire Mesh (3/4"AL.105IN)
2AL.063IN
Aluminum Wire Mesh - 2 x 2 Mesh, 0.063" Diameter Wire
4 x 4 to 10 x 10 Aluminum Woven Wire Mesh (4AL.120PL)
4AL.047PL
Aluminum Wire Mesh - 4 x 4 Mesh, 0.047" Diameter Wire
Material N/A Aluminum N/A N/A Aluminum N/A Aluminum N/A Aluminum
Mesh N/A 1 N/A N/A 2 N/A 2 N/A 4
Wire Diameter N/A 0.120 in N/A N/A 0.080 in N/A 0.063 in N/A 0.047 in
Width of Opening N/A 0.880 in N/A N/A 0.420 in N/A 0.437 in N/A 0.203 in
Weave/Crimp Type N/A Intercrimp/Lock N/A N/A Intercrimp/Lock N/A Intercrimp/Lock N/A Plain
% of Open Area N/A 77.44 % N/A N/A 70.56 % N/A 76.39 % N/A 65.93 %
Weight N/A 0.318 lb/ft² N/A N/A 0.276 lb/ft² N/A 0.171 lb/ft² N/A 0.197 lb/ft²
Silicon (Si) - Alloy 1350 N/A 0.10 % N/A N/A 0.10 % N/A 0.10 % N/A 0.10 %
Iron (Fe) - Alloy 1350 N/A 0.40 % N/A N/A 0.40 % N/A 0.40 % N/A 0.40 %
Copper (Cu) - Alloy 1350 N/A 0.05 % N/A N/A 0.05 % N/A 0.05 % N/A 0.05 %
Manganese (Mn) - Alloy 1350 N/A 0.01 % N/A N/A 0.01 % N/A 0.01 % N/A 0.01 %
Chromium (Cr) - Alloy 1350 N/A 0.01 % N/A N/A 0.01 % N/A 0.01 % N/A 0.01 %
Zinc (Zn) - Alloy 1350 N/A 0.05 % N/A N/A 0.05 % N/A 0.05 % N/A 0.05 %
Gallium (Ga) - Alloy 1350 N/A 0.03 % N/A N/A 0.03 % N/A 0.03 % N/A 0.03 %
Other - Alloy 1350 N/A Trace N/A N/A Trace N/A Trace N/A Trace
Aluminum - Alloy 1350 N/A 99.50 % N/A N/A 99.50 % N/A 99.50 % N/A 99.50 %
Silicon (Si) - Alloy 5052 N/A 0.25 % N/A N/A 0.25 % N/A 0.25 % N/A 0.25 %
Iron (Fe) - Alloy 5052 N/A 0.40 % N/A N/A 0.40 % N/A 0.40 % N/A 0.40 %
Copper (Cu) - Alloy 5052 N/A 0.10 % N/A N/A 0.10 % N/A 0.10 % N/A 0.10 %
Manganese (Mn) - Alloy 5052 N/A 0.10 % N/A N/A 0.10 % N/A 0.10 % N/A 0.10 %
Magnesium (Mg) - Alloy 5052 N/A 2.2 to 2.8 % N/A N/A 2.2 to 2.8 % N/A 2.2 to 2.8 % N/A 2.2 to 2.8 %
Chromium (Cr) - Alloy 5052 N/A 0.15 to 0.35 % N/A N/A 0.15 to 0.35 % N/A 0.15 to 0.35 % N/A 0.15 to 0.35 %
Zinc (Zn) - Alloy 5052 N/A 0.10 % N/A N/A 0.10 % N/A 0.10 % N/A 0.10 %
Aluminum - Alloy 5052 N/A Remainder N/A N/A Remainder N/A Remainder N/A Remainder
Silicon (Si) - Alloy 5056 N/A 0.3 % N/A N/A 0.3 % N/A 0.3 % N/A 0.3 %
Iron (Fe) - Alloy 5056 N/A 0.40 % N/A N/A 0.40 % N/A 0.40 % N/A 0.40 %
Copper (Cu) - Alloy 5056 N/A 0.1 % N/A N/A 0.1 % N/A 0.1 % N/A 0.1 %
Manganese (Mn) - Alloy 5056 N/A 0.05 to 0.20 % N/A N/A 0.05 to 0.20 % N/A 0.05 to 0.20 % N/A 0.05 to 0.20 %
Magnesium (Mg) - Alloy 5056 N/A 4.5 to 5.6 % N/A N/A 4.5 to 5.6 % N/A 4.5 to 5.6 % N/A 4.5 to 5.6 %
Chromium (Cr) - Alloy 5056 N/A 0.05 to 0.20 % N/A N/A 0.05 to 0.20 % N/A 0.05 to 0.20 % N/A 0.05 to 0.20 %
Zinc (Zn) - Alloy 5056 N/A 0.10 % N/A N/A 0.10 % N/A 0.10 % N/A 0.10 %
Aluminum - Alloy 5056 N/A Remainder N/A N/A Remainder N/A Remainder N/A Remainder
Silicon (Si) - Alloy 6061 N/A 0.40 to 0.8 % N/A N/A 0.40 to 0.8 % N/A 0.40 to 0.8 % N/A 0.40 to 0.8 %
Iron (Fe) - Alloy 6061 N/A 0.70 % N/A N/A 0.70 % N/A 0.70 % N/A 0.70 %
Copper (Cu) - Alloy 6061 N/A 0.15 to 0.40 % N/A N/A 0.15 to 0.40 % N/A 0.15 to 0.40 % N/A 0.15 to 0.40 %
Manganese (Mn) - Alloy 6061 N/A 0.15 % N/A N/A 0.15 % N/A 0.15 % N/A 0.15 %
Magnesium (Mg) - Alloy 6061 N/A 0.8 to 1.2 % N/A N/A 0.8 to 1.2 % N/A 0.8 to 1.2 % N/A 0.8 to 1.2 %
Chromium (Cr) - Alloy 6061 N/A 0.04 to 0.35 % N/A N/A 0.04 to 0.35 % N/A 0.04 to 0.35 % N/A 0.04 to 0.35 %
Zinc (Zn) - Alloy 6061 N/A 0.25 % N/A N/A 0.25 % N/A 0.25 % N/A 0.25 %
Titanium (Ti) - Alloy 6061 N/A 0.15 % N/A N/A 0.15 % N/A 0.15 % N/A 0.15 %
Aluminum - Alloy 6061 N/A Remainder N/A N/A Remainder N/A Remainder N/A Remainder
Additional Information N/A

Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon.

Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218oF, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications.

The items listed on this website represent many of the most requested specifications of aluminum woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.

N/A N/A

Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon.

Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218oF, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications.

The items listed on this website represent many of the most requested specifications of aluminum woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.

N/A

Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon.

Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218oF, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications.

The items listed on this website represent many of the most requested specifications of aluminum woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.

N/A

Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon.

Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218oF, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications.

The items listed on this website represent many of the most requested specifications of aluminum woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.

Popular Industries and Applications N/A Aerospace Agricultural Architectural Automotive Bird Screen Building & Construction Filtration & Separation Food Infill Panels Marine Industries Pest & Critter Control Ventilation N/A N/A Aerospace Agricultural Architectural Automotive Bird Screen Building & Construction Filtration & Separation Food Infill Panels Marine Industries Pest & Critter Control Ventilation N/A Aerospace Agricultural Architectural Automotive Bird Screen Building & Construction Filtration & Separation Food Infill Panels Marine Industries Pest & Critter Control Ventilation N/A Aerospace Agricultural Architectural Automotive Bird Screen Building & Construction Filtration & Separation Food Infill Panels Marine Industries Pest & Critter Control Ventilation
Maximum Carbon (C) N/A
Maximum Manganese (Mn) N/A
Maximum Iron (Fe) N/A
Copper (Cu) N/A
Minimum Nickel (Ni) N/A
Sulphur & Silicon (S & Si) N/A
Note on RFQ Quantity N/A Please Specify Qty to be Quoted. Item will be added to Quote Cart.
Proceed to Checkout in order to submit RFQ