Edward J. Darby & Son, Inc.
Edward J. Darby & Son, Inc.
PO BOX 50049
Philadelphia, PA 19132
Phone: 215-236-2203 • Fax: 215-236-9989
Email: [email protected]
Website: www.darbywire.b2bdd.net
Print Back
Monel 400 is a copper-nickel alloy that is preferred by industrial users who seek a high performing alloy for use in highly caustic environments. The wire mesh specifications featured here are popularly requested and commonly stocked items that many industrial users select for various filtration and separation applications. Keep in mind the list of items here is not exhaustive.

Should you not see your required specification here, please contact us to discuss your requirement or continue to browse other specifications in the mesh by material section of the website. Darby also offers custom manufacturing.
Monel Wire Mesh for Filtration and Separation Applications
Unit of Measure
Items 1 x 1 Inch (in) to 10 x 10 Monel Woven Wire Mesh (2MO.063PL)
2MO.063PL
Monel Woven Wire Mesh - 2 x 2 Mesh, 0.063" Diameter Wire 		1 x 1 Inch (in) to 10 x 10 Monel Woven Wire Mesh (3MO.063PL)
4MO.063PL
Monel Woven Wire Mesh - 4 x 4 Mesh, 0.063" Diameter Wire 		1 x 1 Inch (in) to 10 x 10 Monel Woven Wire Mesh (4MO.035PL)
4MO.047PL
Monel Woven Wire Mesh - 4 x 4 Mesh, 0.047" Diameter Wire 		1 x 1 Inch (in) to 10 x 10 Monel Woven Wire Mesh (3MO.063PL)
6MO.063PL
Monel Woven Wire Mesh - 6 x 6 Mesh, 0.063" Diameter Wire 		1 x 1 Inch (in) to 10 x 10 Monel Woven Wire Mesh (10MO.041PL)
8MO.028PL
Monel Woven Wire Mesh - 8 x 8 Mesh, 0.028" Diameter Wire
Material N/A Monel
Mesh N/A 2 N/A 4 N/A 4 N/A 6 N/A 8
Wire Diameter N/A 0.063 in N/A 0.063 in N/A 0.047 in N/A 0.063 in N/A 0.028 in
Width of Opening N/A 0.437 in N/A 0.187 in N/A 0.203 in N/A 0.104 in N/A 0.097 in
Weave/Crimp Type N/A Plain
% of Open Area N/A 76.39 % N/A 55.95 % N/A 65.93 % N/A 38.69 % N/A 60.22 %
Weight N/A 0.577 lb/ft² N/A 1.181 lb/ft² N/A 0.649 lb/ft² N/A 1.837 lb/ft² N/A 0.464 lb/ft²
Maximum Carbon (C) N/A 0.3 %
Maximum Manganese (Mn) N/A 2.0 %
Maximum Iron (Fe) N/A 2.5 %
Copper (Cu) N/A 28.0 to 34.0 %
Minimum Nickel (Ni) N/A 63.0 %
Sulphur & Silicon (S & Si) N/A Traces
Additional Information N/A

Our records indicate that this alloy was made readily available in the early 20th century, which is when Darby began to specialize in stocking the standard or market grade specifications of Monel 400. Darby remains a leading source for these items. Darby also maintains the capabilities to weave numerous heavy duty Monel wire mesh specifications in diameter wires as heavy as 1/4” (.250”). With access to both domestic and international mills, Darby routinely offers custom manufactured Monel 400 pre-crimped woven wire mesh.

Monel 400 woven wire mesh is generally sold in quantities less than full rolls due to the high cost and long life cycle of this alloy.

The items listed on this website represent many of the most requested specifications of Monel woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.