Print Back

T-304 stainless steel is the most widely available of all stainless steels in the wire mesh industry. Aside from the countless combinations of mesh opening sizes and diameter wire available both from stock and through manufacturing, T-304 SS exhibits many benefits and is largely considered the standard of the industry. T-304 SS has excellent corrosion resistance in a wide range of environments and is used in a wide range of applications.

Many of the popular specifications featured here are custom manufactured. Others items are highly requested and therefore typically available from stock for immediate shipment.

These specifications are often used in numerous industrial and non-industrial applications, including general industrial use, shaker screens, heat treating, food processing, particle separation and building and construction use. Architects and commercial and residential designers also use these specifications for infill panel, ceiling panels, decorative signage, room dividers and security use. These items are also used in various fencing, caging and enclosure applications.

0.937 - 0.228 Inch (in) Opening Size T-304 Stainless Steel Wire Mesh
Unit of Measure
Items 4 x 4 Inch (in) Opening Size to 1 x 1 Inch (in) Stainless Steel Welded Wire Mesh (1304.080WD)
1304.063WD
T-304 Stainless Steel Wire Mesh - 1" Mesh, 0.063" Diameter Wire
4 x 4 Inch (in) Opening Size to 1 x 1 Inch (in) Stainless Steel Welded Wire Mesh (1"X2"304.080WD)
1"X2"304.080WD
T-304 Stainless Steel Wire Mesh - 1" x 2" Mesh, 0.080" Diameter Wire
4 x 4 Inch (in) Opening Size to 1 x 1 Inch (in) Stainless Steel Welded Wire Mesh (1304.080WD)
1304.080WD
T-304 Stainless Steel Wire Mesh - 1" Mesh, 0.080" Diameter Wire
4 x 4 Inch (in) Opening Size to 3/4 x 3/4 Inch (in) T-304 Stainless Steel Wire Mesh (1304.135IN)
1304.093IN
T-304 Stainless Steel Wire Mesh - 1" Mesh, 0.093" Diameter Wire
4 x 4 Inch (in) Opening Size to 3/4 x 3/4 Inch (in) T-304 Stainless Steel Wire Mesh (1304.135IN)
1304.105IN
T-304 Stainless Steel Wire Mesh - 1" Mesh, 0.105" Diameter Wire
Mesh N/A 1 in N/A 1 x 2 in N/A 1 in N/A 1 in N/A 1 in
Wire Diameter N/A 0.063 in N/A 0.080 in N/A 0.080 in N/A 0.093 in N/A 0.105 in
Width of Opening N/A 0.937 in N/A 0.920 x 1.920 in N/A 0.920 in N/A 0.907 in N/A 0.895 in
Construction Type N/A Welded N/A Welded N/A Welded N/A Intercrimp/Lock N/A Intercrimp/Lock
% of Open Area N/A 87.80 % N/A 88.40 % N/A 84.64 % N/A 82.26 % N/A 80.10 %
Weight N/A 0.261 lb/ft² N/A 0.312 lb/ft² N/A 0.421 lb/ft² N/A 0.558 lb/ft² N/A 0.727 lb/ft²
Alloy N/A T-304 Stainless Steel
Maximum Carbon (C) N/A 0.08 %
Maximum Manganese (Mn) N/A 2.0 %
Maximum Phosphorus (P) N/A 0.045 %
Maximum Sulphur (S) N/A 0.03 %
Maximum Silicon (Si) N/A 1.00 %
Chromium (Cr) N/A 18.00 to 20.00 %
Nickel (N) N/A 8.00 to 10.50 %
Iron (Fe) N/A Balance
Maximum Nitrogen (N)1 N/A 0.10 %
Additional Information N/A

Often referred to 18-8 due to its Chromium-Nickel chemical composition, T-304 stainless steel is available in both woven and welded constructions – both from stock and through custom manufacturing.

The items listed on this website represent many of the most requested specifications of T-304 stainless steel wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements.

Popular Industries and Applications N/A Some of the more popular applications and industries that use T-304 stainless steel are listed below:
  • General industrial use
  • Mining
  • Quarrying
  • Beer brewing
  • Water filtration
  • Particle separation
  • Automotive
  • Basket fabrication
  • Refinery & oil field
  • Aerospace
  • Food processing
  • Scientific & laboratory use
  • 1 Other, If Applicable