Lightweight and corrosion resistant in most normal environments, aluminum woven wire mesh is often used in a wide range of industrial applications where separation, filtration or ventilation may be required. Aluminum mesh is also popular in the aerospace, agricultural, architectural, automotive, construction, electronic, food and marine industries.
Darby specializes in stocking many of the standard or market grades of aluminum in alloy 5052. Alloys 1350, 5056 and 6061 are largely considered special order items in aluminum wire mesh. There are times that these aluminum alloys are on the floor or can be readily manufactured.
Material |
N/A Aluminum |
Mesh |
N/A 40 |
Wire Diameter |
N/A 0.0085 in |
Width of Opening |
N/A 0.017 in |
Weave/Crimp Type |
N/A Plain |
% of Open Area |
N/A 43.56 % |
Weight |
N/A 0.067 lb/ft² |
Note on RFQ Quantity |
N/A
Please Specify Qty to be Quoted. Item will be added to Quote Cart. Proceed to Checkout in order to submit RFQ |
Silicon (Si) - Alloy 1350 |
N/A 0.10 % |
Iron (Fe) - Alloy 1350 |
N/A 0.40 % |
Copper (Cu) - Alloy 1350 |
N/A 0.05 % |
Manganese (Mn) - Alloy 1350 |
N/A 0.01 % |
Chromium (Cr) - Alloy 1350 |
N/A 0.01 % |
Zinc (Zn) - Alloy 1350 |
N/A 0.05 % |
Gallium (Ga) - Alloy 1350 |
N/A 0.03 % |
Other - Alloy 1350 |
N/A Trace |
Aluminum - Alloy 1350 |
N/A 99.50 % |
Silicon (Si) - Alloy 5052 |
N/A 0.25 % |
Iron (Fe) - Alloy 5052 |
N/A 0.40 % |
Copper (Cu) - Alloy 5052 |
N/A 0.10 % |
Manganese (Mn) - Alloy 5052 |
N/A 0.10 % |
Magnesium (Mg) - Alloy 5052 |
N/A 2.2 to 2.8 % |
Chromium (Cr) - Alloy 5052 |
N/A 0.15 to 0.35 % |
Zinc (Zn) - Alloy 5052 |
N/A 0.10 % |
Aluminum - Alloy 5052 |
N/A Remainder |
Silicon (Si) - Alloy 5056 |
N/A 0.3 % |
Iron (Fe) - Alloy 5056 |
N/A 0.40 % |
Copper (Cu) - Alloy 5056 |
N/A 0.1 % |
Manganese (Mn) - Alloy 5056 |
N/A 0.05 to 0.20 % |
Magnesium (Mg) - Alloy 5056 |
N/A 4.5 to 5.6 % |
Chromium (Cr) - Alloy 5056 |
N/A 0.05 to 0.20 % |
Zinc (Zn) - Alloy 5056 |
N/A 0.10 % |
Aluminum - Alloy 5056 |
N/A Remainder |
Silicon (Si) - Alloy 6061 |
N/A 0.40 to 0.8 % |
Iron (Fe) - Alloy 6061 |
N/A 0.70 % |
Copper (Cu) - Alloy 6061 |
N/A 0.15 to 0.40 % |
Manganese (Mn) - Alloy 6061 |
N/A 0.15 % |
Magnesium (Mg) - Alloy 6061 |
N/A 0.8 to 1.2 % |
Chromium (Cr) - Alloy 6061 |
N/A 0.04 to 0.35 % |
Zinc (Zn) - Alloy 6061 |
N/A 0.25 % |
Titanium (Ti) - Alloy 6061 |
N/A 0.15 % |
Aluminum - Alloy 6061 |
N/A Remainder |
Additional Information |
N/A
Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon. Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218oF, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications. The items listed on this website represent many of the most requested specifications of aluminum woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements. |
