| Items |
 /Asset/Bronze-Primary--12-Mesh-.jpg 16BZ.018PL Bronze Wire Mesh - 16 x 16 Mesh, 0.018" Diameter Wire |
 /Asset/Primary-Brass--20-Mesh-.jpg 20BRS.016PL Brass Wire Mesh - 20 x 20 Mesh, 0.016" Diameter Wire |
 /Asset/Copper-Primary--80-Mesh-.jpg 60CU.0075PL Copper Wire Mesh - 60 x 60 Mesh, 0.0075" Diameter Wire |
/Asset/Copper-Primary--80-Mesh-.jpg 80CU.0055PL Copper Wire Mesh - 80 x 80 Mesh, 0.0055" Diameter Wire |
 /Asset/By-Opening-size-920-to-2288.jpg 2BRS.063PL Brass Wire Mesh - 2 x 2 Mesh, 0.063" Diameter Wire |
|||||
| Material | Bronze | Brass | Copper | Copper | Brass | |||||
| Mesh | 16 | 20 | 60 | 80 | 2 | |||||
| Wire Diameter | 0.018 in | 0.016 in | 0.0075 in | 0.0055 in | 0.063 in | |||||
| Width of Opening | 0.0445 in | 0.0340 in | 0.0092 in | 0.0070 in | 0.437 in | |||||
| Weave/Crimp Type | Plain | |||||||||
| % of Open Area | 50.69 % | 46.24 % | 30.25 % | 31.36 % | 76.39 % | |||||
| Weight | 0.388 lb/ft² | 0.381 lb/ft² | 0.271 lb/ft² | 0.194 lb/ft² | 0.566 lb/ft² | |||||
| Weave Type | ||||||||||
| Industry Standards | Woven to ASTM E-2016-11 | |||||||||
| Additional Information |
Due to the intricacies of weaving these items, there are times where commercial bronze is no longer an option and phosphorous bronze must be used to weave. The chemical composition of phosphorous bronze wire mesh differs from bronze wire mesh in that a small amount of phosphorous is included. Phos bronze, as it is commonly referred to in the industry, exhibits physical and anti-corrosive properties slightly superior to copper and brass and has a chemical composition of approximately 94% Copper, 4.75& Tin, and .25% Phosphorous. As a general rule, the weaving limit for commercial bronze is 100 x 100 Mesh, .0045” diameter wire; anything finer, like 150 x 150 Mesh or 200 x 200 Mesh, must be woven in phosphorous bronze. The limit for weaving phosphorous bronze mesh is recognized at 325 x 325 Mesh, .0014” diameter wire. The items listed on this website represent many of the most requested specifications of bronze woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements. |
Brass woven wire mesh is comprised of copper and zinc. A chemical composition of 65% Copper - 35% Zinc (a.k.a., 270 Yellow Brass) is recognized as the standard for stocked wire mesh in the industry. 70% Copper - 30% Zinc (a.k.a., 260 High Brass) is typically reserved for custom manufacturing. The presence of zinc in brass wire mesh is important because it provides added abrasion resistance and allows for higher tensile strengths. And because it is primarily composed of copper, it maintains many of copper's unique characteristics, namely malleability and resistance to certain acids. Also, due to its unique golden color and unique characteristics, brass wire mesh is used in decorative, architectural and even artistic applications. Should you not see your preferred specification listed here, please contact us to discuss your requirements. |
Copper wire mesh is durable in many types of environments. Although it is softer than a similar stainless steel wire mesh, it is also resistant to atmospheric corrosion but attacked by oxidizing agents such as nitric acid, ferric chloride, cyanides, and ammonia acids compounds. Darby’s copper wire mesh is woven to the industry standard, ASTM E-2016-11, is 99.9% pure copper and when exposed to the atmosphere, a patina, or a thin green layer, is likely to develop. The items listed on this website represent many of the most requested specifications of copper woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements. |
Copper wire mesh is durable in many types of environments. Although it is softer than a similar stainless steel wire mesh, it is also resistant to atmospheric corrosion but attacked by oxidizing agents such as nitric acid, ferric chloride, cyanides, and ammonia acids compounds. Darby’s copper wire mesh is woven to the industry standard, ASTM E-2016-11, is 99.9% pure copper and when exposed to the atmosphere, a patina, or a thin green layer, is likely to develop. The items listed on this website represent many of the most requested specifications of copper woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements. |
The items listed on this website represent many of the most requested specifications of brass woven wire mesh. These items are available from stock or can be custom manufactured. Should you not see your preferred specification, please contact us to discuss your requirements. | |||||
| Popular Industries and Applications |
|
|
|
|
|
|||||
|
|
||||||||||
Connect with Darby